# Journal figure resolution: 300 dpi in pixels

> A 90 mm journal column needs 1063 px at 300 dpi and 3544 px for 1000 dpi line art. Scale the vector figure to the column, then export TIFF or PDF.

URL: https://vectorpip.com/figure-300-dpi-for-journal/
Updated: 2026-11-19

A 300 dpi figure needs 300 pixels per printed inch: 1063 px for a 90 mm column. Plots and line art often need 1000 dpi, 3544 px. Export them from the vector file; retagging a PNG adds no pixels.

| Figure type | Elsevier asks | 90 mm column | 190 mm, two columns |
| --- | --- | --- | --- |
| Photographs, micrographs (halftone) | 300 dpi | 1063 px | 2245 px |
| Photos with labels or arrows (combination) | 500 dpi | 1772 px | 3741 px |
| Plots, diagrams, line drawings (line art) | 1000 dpi | 3544 px | 7481 px |
| Vector figure (PDF, EPS) | no dpi | keep it vector | keep it vector |

Lettering at the printed size: 7 pt, sub- and superscripts 6 pt. Tiers, widths and type sizes from Elsevier's artwork instructions, read 2026-10-20; other journals set their own values, commonly 300–1200 dpi, so check your author guide. Pixel counts are rounded up.

## Why changing the dpi field does nothing

dpi is pixels divided by printed inches. A 1063-pixel-wide image printed 90 mm wide is 300 dpi; the same image printed 190 mm wide is 142 dpi. The number stored in a PNG or TIFF header is only a label for that division. Typing 300 into it changes no pixel, and the submission system measures pixels against the width you give.

A figure drawn as vectors, such as a plot saved as PDF or SVG from Matplotlib, R or Origin, has no dpi until it becomes pixels. That is the moment to choose the number: export at 300, 500 or 1000 ppi and the pixel count follows. If all you have is a small PNG, an AI upscaler can enlarge it, but the pixels it adds are guesses, and tick labels and data points can come out changed. Journals also limit generative AI in figures: according to Elsevier’s author guidelines, a plot must be faithfully derived from the underlying data, and AI tools must not create or alter primary research images such as micrographs. Go back to the plotting program and save PDF or SVG.

## Export the figure at the resolution the journal asks

1. Click **Open the figure file** and pick the PDF, SVG, EPS or .ai file your plotting program saved.
2. Look at the labels. A PDF saved by Matplotlib with its default settings brings each label in as shapes in the font it was plotted in: it looks right but can’t be retyped. A PDF that keeps its labels as type opens them as type, and a font your computer doesn’t have, such as DejaVu Sans, is listed in the **Resolve Missing Fonts** dialog; replace it with a font you have, such as Arial, before you go on, or the labels are shown in a substitute font and their widths change.
3. Scale the figure to the printed width. Choose **Select > All** (Ctrl+A / Command+A), open **Window > Transform**, turn on **Constrain Width and Height Proportions** and type **W** 90 mm (or 190 mm). Then choose **Object > Artboards > Fit to Artwork Bounds**. Typing the width into the artboard alone only crops the figure.
4. Check the lettering. A figure plotted 6.4 in wide with 10 pt labels has about 5.5 pt labels at 90 mm, under the 7 pt minimum. Labels that are type can be set to 7 pt in the **Character** panel; labels that came in as shapes can’t, so go back to the plotting program, set the figure size to the column width (3.54 in for 90 mm) and save the PDF again.
5. Choose **File > Export > Export As…**, format **TIFF (tif)**. Under **Resolution** choose **Other** and type 1000 for line art, or choose **High (300 ppi)** for a photograph. Turn on **LZW Compression** and **Embed ICC Profile**. The line under the options shows the pixel count before you click **OK**: 3,556 × 2,667 px for this figure, above the 3,544 px a 90 mm column needs.
6. For a journal that takes vector files, choose **File > Save As…** > PDF with the **[High Quality Print]** preset instead. Every letter is drawn as its shape in the PDF, so the labels print as you see them.

Note: an export larger than 16384 px a side is refused. 190 mm at 2400 ppi is past it; 1000 ppi (7481 px) is fine. The figure is opened and exported in your browser; it is not uploaded.

## Sources and dates

- 1000 dpi line art, 300 dpi halftone, 500 dpi combination; 90 / 140 / 190 mm column widths; 7 pt lettering: Elsevier artwork and media instructions, artwork sizing page, read 2026-10-20.
- Generative AI in figures: Elsevier’s generative AI policies for journals, the section on figures, images and artwork (policy updated June 2026), read 2026-10-21.
- Pixel counts: width in mm ÷ 25.4 × dpi, rounded up to the next whole pixel.
- The figure on this page is a Matplotlib 3.11 PDF saved with default settings (6.4 × 4.8 in, 10 pt DejaVu Sans), opened, scaled and exported in Vectorpip on 2026-10-21.

## Next steps

- Your plot is an SVG: [edit the SVG](https://vectorpip.com/svg-editor/), then save PDF or export TIFF.

## Frequently asked questions
  300, 600 or 1200 dpi?
Use what the author guide of the journal you submit to says; common values run 300–1200. Elsevier's instructions ask photographs at 300, photos with labels at 500 and pure line art at 1000. If your journal asks 1200, choose Other and type 1200.
  TIFF, PNG or JPG?
TIFF is the safe choice for a figure that will be printed; PDF or EPS for vector figures. PNG is lossless and many submission systems take it. JPG compresses lines and text into artifacts; keep it for photographs, and only where the author guide accepts it.
  Can I just set 300 in the file?
You can, and the pixels stay what they were. A 600 px chart tagged 300 dpi prints 51 mm wide, so the system will still reject it for a 90 mm column.
  RGB or CMYK?
Follow the author guide. The TIFF Options dialog here offers RGB, CMYK and Grayscale; pick CMYK only when the instructions say so.

## Keep reading
   What a vector file is, which formats exist, and how to open one What a vector file is, how .ai, .eps, .pdf, .svg and .dxf differ, and how to open, edit and convert them free in your browser. CorelDRAW .cdr is not supported.  Open an .ai file Open an .ai file in your browser: layers, paths and text come in editable, one artboard per page. Export PNG, SVG or PDF, or save it as .ai again.  Convert an SVG to PNG Convert SVG to PNG free: open the SVG, pick 1×, 2× or 3× or any pixel size, keep the background transparent, download. You can edit the SVG first.           Vectorpip
Free online vector editor that works like Illustrator. Runs in your browser; files are opened and saved on your computer, not uploaded.

## Product

- [Editor](https://vectorpip.com/)
- [Open .ai files](https://vectorpip.com/ai-file-viewer/)
- [Image to vector](https://vectorpip.com/vectorize-image/)
- [SVG editor](https://vectorpip.com/svg-editor/)

## Compare

- [Illustrator alternative](https://vectorpip.com/illustrator-alternative/)

## Legal

- [Privacy](https://vectorpip.com/privacy/)
- [Cookies](https://vectorpip.com/cookies/)
- [Terms](https://vectorpip.com/legal/)
- [AI Credits and Refunds](https://vectorpip.com/refund/)
- [About](https://vectorpip.com/about/)

The submission system says your figure’s resolution is too low. What it measures is pixels against the printed width, so the fix is to export more pixels from the original plot, not to change a number in the file.

| Figure type | Elsevier asks | 90 mm column | 190 mm, two columns |
| --- | --- | --- | --- |
| Photographs, micrographs (halftone) | 300 dpi | 1063 px | 2245 px |
| Photos with labels or arrows (combination) | 500 dpi | 1772 px | 3741 px |
| Plots, diagrams, line drawings (line art) | 1000 dpi | 3544 px | 7481 px |
| Vector figure (PDF, EPS) | no dpi | keep it vector | keep it vector |

Lettering at the printed size: 7 pt, sub- and superscripts 6 pt. Tiers, widths and type sizes from Elsevier's artwork instructions, read 2026-10-20; other journals set their own values, commonly 300–1200 dpi, so check your author guide. Pixel counts are rounded up.

## Why changing the dpi field does nothing

dpi is pixels divided by printed inches. A 1063-pixel-wide image printed 90 mm wide is 300 dpi; the same image printed 190 mm wide is 142 dpi. The number stored in a PNG or TIFF header is only a label for that division. Typing 300 into it changes no pixel, and the submission system measures pixels against the width you give.

A figure drawn as vectors, such as a plot saved as PDF or SVG from Matplotlib, R or Origin, has no dpi until it becomes pixels. That is the moment to choose the number: export at 300, 500 or 1000 ppi and the pixel count follows. If all you have is a small PNG, an AI upscaler can enlarge it, but the pixels it adds are guesses, and tick labels and data points can come out changed. Journals also limit generative AI in figures: according to Elsevier’s author guidelines, a plot must be faithfully derived from the underlying data, and AI tools must not create or alter primary research images such as micrographs. Go back to the plotting program and save PDF or SVG.

## Export the figure at the resolution the journal asks

1. Click **Open the figure file** and pick the PDF, SVG, EPS or .ai file your plotting program saved.
2. Look at the labels. A PDF saved by Matplotlib with its default settings brings each label in as shapes in the font it was plotted in: it looks right but can’t be retyped. A PDF that keeps its labels as type opens them as type, and a font your computer doesn’t have, such as DejaVu Sans, is listed in the **Resolve Missing Fonts** dialog; replace it with a font you have, such as Arial, before you go on, or the labels are shown in a substitute font and their widths change.
3. Scale the figure to the printed width. Choose **Select > All** (Ctrl+A / Command+A), open **Window > Transform**, turn on **Constrain Width and Height Proportions** and type **W** 90 mm (or 190 mm). Then choose **Object > Artboards > Fit to Artwork Bounds**. Typing the width into the artboard alone only crops the figure.
4. Check the lettering. A figure plotted 6.4 in wide with 10 pt labels has about 5.5 pt labels at 90 mm, under the 7 pt minimum. Labels that are type can be set to 7 pt in the **Character** panel; labels that came in as shapes can’t, so go back to the plotting program, set the figure size to the column width (3.54 in for 90 mm) and save the PDF again.
5. Choose **File > Export > Export As…**, format **TIFF (tif)**. Under **Resolution** choose **Other** and type 1000 for line art, or choose **High (300 ppi)** for a photograph. Turn on **LZW Compression** and **Embed ICC Profile**. The line under the options shows the pixel count before you click **OK**: 3,556 × 2,667 px for this figure, above the 3,544 px a 90 mm column needs.
6. For a journal that takes vector files, choose **File > Save As…** > PDF with the **[High Quality Print]** preset instead. Every letter is drawn as its shape in the PDF, so the labels print as you see them.

Note: an export larger than 16384 px a side is refused. 190 mm at 2400 ppi is past it; 1000 ppi (7481 px) is fine. The figure is opened and exported in your browser; it is not uploaded.

## Sources and dates

- 1000 dpi line art, 300 dpi halftone, 500 dpi combination; 90 / 140 / 190 mm column widths; 7 pt lettering: Elsevier artwork and media instructions, artwork sizing page, read 2026-10-20.
- Generative AI in figures: Elsevier’s generative AI policies for journals, the section on figures, images and artwork (policy updated June 2026), read 2026-10-21.
- Pixel counts: width in mm ÷ 25.4 × dpi, rounded up to the next whole pixel.
- The figure on this page is a Matplotlib 3.11 PDF saved with default settings (6.4 × 4.8 in, 10 pt DejaVu Sans), opened, scaled and exported in Vectorpip on 2026-10-21.

## Next steps

- Your plot is an SVG: [edit the SVG](https://vectorpip.com/svg-editor/), then save PDF or export TIFF.

## Frequently asked questions

### 300, 600 or 1200 dpi?

Use what the author guide of the journal you submit to says; common values run 300–1200. Elsevier's instructions ask photographs at 300, photos with labels at 500 and pure line art at 1000. If your journal asks 1200, choose Other and type 1200.

### TIFF, PNG or JPG?

TIFF is the safe choice for a figure that will be printed; PDF or EPS for vector figures. PNG is lossless and many submission systems take it. JPG compresses lines and text into artifacts; keep it for photographs, and only where the author guide accepts it.

### Can I just set 300 in the file?

You can, and the pixels stay what they were. A 600 px chart tagged 300 dpi prints 51 mm wide, so the system will still reject it for a 90 mm column.

### RGB or CMYK?

Follow the author guide. The TIFF Options dialog here offers RGB, CMYK and Grayscale; pick CMYK only when the instructions say so.

## Keep reading

- [What a vector file is, which formats exist, and how to open one](https://vectorpip.com/vector-files/): What a vector file is, how .ai, .eps, .pdf, .svg and .dxf differ, and how to open, edit and convert them free in your browser. CorelDRAW .cdr is not supported.
- [Open an .ai file](https://vectorpip.com/ai-file-viewer/): Open an .ai file in your browser: layers, paths and text come in editable, one artboard per page. Export PNG, SVG or PDF, or save it as .ai again.
- [Convert an SVG to PNG](https://vectorpip.com/svg-to-png/): Convert SVG to PNG free: open the SVG, pick 1×, 2× or 3× or any pixel size, keep the background transparent, download. You can edit the SVG first.
