# KDP cover size calculator: spine width and full cover

> Type your trim size, page count and paper to get the spine width and full cover size from KDP's own formula, then open the cover at that size in a free editor.

URL: https://vectorpip.com/kdp-cover-size-calculator/
Updated: 2026-11-19

Cover width is 0.125 in + back cover + spine + front cover + 0.125 in; height is trim height + 0.25 in. Spine is page count × 0.002252 in on white paper, × 0.0025 on cream.

Trim size5 × 8 in5.06 × 7.81 in5.25 × 8 in5.5 × 8.5 in6 × 9 in6.14 × 9.21 in6.69 × 9.61 in7 × 10 in7.44 × 9.69 in7.5 × 9.25 in8 × 10 in8.25 × 6 in8.25 × 8.25 in8.5 × 8.5 in8.5 × 11 in8.27 × 11.69 in (A4)PagesPaperWhiteCreamPremium colorStandard color
Spine **0.450 in**Cover file **12.700 × 9.250 in**

With 0.125 in of bleed on every side. 200 pages is enough for spine text (79 or more).

KDP prints the back cover, the spine and the front cover as one sheet, then trims it. The file you upload has to be that whole sheet plus 0.125 in of bleed round the outside, so a 6 × 9 in paperback of 200 pages on white paper needs a PDF 12.700 × 9.250 in.

| Trim size | Pages | Spine | Cover file (w × h) | Note |
| --- | --- | --- | --- | --- |
| 5 × 8 in | 60, cream | 0.150 in | 10.400 × 8.250 in | No spine text: under 79 pages |
| 5.5 × 8.5 in | 240, cream | 0.600 in | 11.850 × 8.750 in |  |
| 6 × 9 in | 200, white | 0.450 in | 12.700 × 9.250 in | The most common trim |
| 6 × 9 in | 350, cream | 0.875 in | 13.125 × 9.250 in |  |
| 8.5 × 8.5 in | 32, premium color | 0.075 in | 17.325 × 8.750 in | Picture book; no spine text |
| 8.5 × 11 in | 100, white | 0.225 in | 17.475 × 11.250 in | Workbook; large trim |

Worked out with the formula above and rounded to a thousandth of an inch; KDP's own cover calculator can differ in the last digit. Calculated in your browser; nothing is sent.

## Why the spine changes with the page count

The spine is as thick as the stack of pages, so KDP works it out from the page count and the paper: each white page adds 0.002252 in, each cream page 0.0025 in, a premium color page 0.002347 in and a standard color page 0.002252 in. Add or remove pages and the cover changes width, which is the usual reason a cover made for one draft is rejected for the next. Spine text needs 79 pages or more.

## Make the cover at this size

1. In the calculator, choose your **Trim size**, type the **Pages** and choose the **Paper**, then click **Make the cover at this size**. The editor opens **File > New** with the width, height, 0.125 in bleed on each side and **CMYK** already filled in.
2. Click **Create**. The artboard is the trimmed cover; the red line round it is the bleed, and two guides mark the edges of the spine.
3. Run the background out to the red line on all four sides. Keep text at least 0.125 in inside the trim, and spine text at least 0.0625 in from each edge of the spine.
4. Choose **File > Save as PDF…**, choose the **[PDF/X-1a:2001]** preset and make sure **Trim Marks** is off. It flattens transparency and writes CMYK, as KDP asks; the CMYK is converted with a simple formula, not a print profile, so check the colors in KDP’s previewer.

Note: Before you upload, check the PDF against KDP’s list: one page, CMYK with no spot colors (the [PDF/X-1a:2001] preset keeps a spot swatch as an ink of its own, so use process colors), pictures at 300 DPI or more, transparency flattened, no crop marks, under 650 MB (KDP recommends 40 MB or less).

## Sources and dates

- Amazon KDP help: “Create a Paperback Cover” (formula, bleed, spine factors, 79 pages, spine text 0.0625 in, 300 DPI, 650 MB, crop marks, barcode), read 2026-10-27.
- Amazon KDP help: “Set Trim Size, Bleed, and Margins” (the paperback trim sizes in the calculator), read 2026-10-27.

## Frequently asked questions

### KDP says my cover size doesn't match. What do I check?

Three numbers: the page count you entered on KDP (the spine is worked out from it), the paper you picked, and the bleed. The PDF page must be the full size with 0.125 in on all four sides, and it must be one page: back, spine and front together.

### What about a hardcover?

A case laminate cover wraps round the boards and has its own sizes. Use KDP's cover calculator for a hardcover; the numbers here are for paperbacks.

### I work in millimeters. What are the factors?

White paper 0.0572 mm per page, cream 0.0635 mm, premium color 0.0596 mm, standard color 0.0572 mm; the bleed is 3.2 mm. Those are KDP's own metric values.

### Does a cover with a white background need bleed too?

Yes. KDP checks the size of the file, not what is printed at its edge, so the PDF must still be 0.125 in larger on every side.

### Where does the barcode go?

If you don't add your own, KDP places a barcode on the back cover for you, in the lower left corner for a right-to-left book. Keep the bottom of the back cover free of text that matters, and check the barcode's place in KDP's previewer.

## Keep reading

- [KDP interior bleed: page size and margins](https://vectorpip.com/kdp-interior-bleed/): Set each page 0.125 in wider and 0.25 in taller than the trim (6 × 9 → 6.125 × 9.25 in), run pictures past the cut and keep text 0.375 in inside it.
- [Add bleed to a PDF for printing](https://vectorpip.com/add-bleed-to-pdf/): Open the PDF you made and 0.125 in of bleed goes on at once. The card shows where the art stops at the trim and extends it into the bleed in one click.
- [Check a PDF before you send it to print](https://vectorpip.com/print-ready-file-checker/): Open your PDF and see what a print shop would send back: no bleed, pictures under 300 ppi, missing fonts, text too near the trim. Add the bleed with one click.
