Choose a picture and it is traced into one color of closed shapes, with a light background left out. Then pick your Silhouette Studio edition: Basic gets a DXF, Designer Edition or above gets an SVG. Type the width in inches; the card checks the thinnest part at that size.
- Click Choose the picture, or drop a JPG or PNG on this card. It is traced at once into one color, 6 in wide, with the background left out.
- Under Your Studio, pick Basic or Designer or above. Type the finished width in inches.
- Zoom in on thin parts. If the card says a part is too thin to weed, make it wider in the card.
- Click Download DXF (Basic) or Download SVG, then choose File > Open in Silhouette Studio and check the size once.
| Formats | JPG or PNG in; DXF for Studio Basic, SVG for Designer Edition or above |
|---|
| Limits | Traces a copy of at most 1360 px on its long side and 1.5 megapixels in all |
|---|
| Where it runs | In your browser, no account; nothing is sent anywhere |
|---|
Silhouette Studio Basic, the free edition, does not open SVG files; Designer Edition or above does (Silhouette America's software FAQ). For Basic, pick Basic and download the DXF, which holds the cut lines only, without fills. A colored picture comes out as one color here. The card flags parts thinner than 1 mm (about 0.04 in), a rule of thumb for vinyl; small pieces are hard to weed. No .studio3 files.
- Does my Cameo need an SVG?
- Not with Studio Basic, which can't open SVG files. Pick Basic and download the DXF. With Designer Edition or above, pick Designer or above for the SVG.
- Can I open the file in Studio Basic?
- Yes, the DXF. According to Silhouette user community tutorials, Studio Basic opens DXF files with the cut lines ready to cut. The DXF from this page holds only closed cut lines, no fills, which is all a cut needs.
- Why is my picture one color?
- This page traces into one color for cutting from one sheet. For layered vinyl, trace each color as its own picture, or use the Image Trace panel in the editor with more colors.
- Looking for free SVG designs?
- This page makes a file from your own picture; it has no design library. Use art you own or have the rights to.
RelatedVectorize an imageConvert an SVG to DXFConvert an image to DXF for your laser or CNC