Get a file xTool Creative Space opens as separate shapes to cut and engrave, in seconds.
PNG · 700 px
SVG · 90 mmChoose a picture or an SVG. The outer edge, with any hole through it, is written as its own stroked path and everything inside as filled shapes, so after import you set the outline to cut and the rest to engrave. Lettering comes out as shapes, which matters: XCS does not show text that is still text in an SVG.
| Formats | PNG, JPG or SVG in; SVG out |
|---|---|
| Limits | A picture is traced from a copy of at most 1360 px on its long side and 1.5 megapixels; the SVG carries its width in millimeters |
| Where it runs | In your browser, no account; nothing is sent anywhere |
A picture is traced into dark shapes first; for a photo, import the PNG into XCS and engrave it as a picture. The file can't tell XCS what to cut: you set that in XCS after import, and this page only makes sure the outline and the inside are separate shapes. The card flags cut parts thinner than 0.3 mm, a rule of thumb; check your material. Cut outline + engrave inside cuts the outer edge and any hole through the piece, so letters and inner shapes stay. No .xcs project files, and the machine's work area isn't checked here.
RelatedMake an SVG for Glowforge: cut lines and engravesConvert an image to DXF for your laser or CNCVectorize an image