Add bleed to a PDF for printing

Open the PDF and 0.125 in of bleed goes on at once, free.

Bleed only: white edge
Art in the bleed
How to Use

Choose the PDF and each page opens as an artboard with 0.125 in of bleed around it. The card then measures which edges the art reaches. Where a background or photo stops at the trim, the new strip would print white, and Extend art into the bleed fills it. Vectors stay vectors, and text stays text in the fonts this computer has.

  1. Click Choose the PDF, or drop a PDF or .ai on the page. The bleed goes on at once; the red line around the page is its outer edge. A PDF that already had bleed gets 0.125 in too.
  2. If the card says the art stops at the trim, click Extend art into the bleed. Shapes and flat color move out to the red line; a picture's edge is repeated, or mirrored if it is a photo. Type, ellipses and rotated objects stay put: drag those yourself.
  3. Once the art reaches the bleed, the card shows Bleed widths: pick 3 mm or 5 mm if your printer names one, then extend again if the card asks. Any other width goes in File > Document Setup... under Bleed.
  4. Click Save PDF. In Save as PDF, Marks and Bleeds already has Trim Marks and Use Document Bleed Settings ticked; untick Trim Marks if your printer asks for no marks. Click Save PDF again.
Bleed0.125 in when it opens; 3 mm or 5 mm from the card; up to 1 in a side in File > Document Setup...
Fills the bleedShapes and flat color moved out; a picture's edge repeated, or mirrored if it is a photo; one undo step
SavesPDF with trim marks, TrimBox and BleedBox, or PDF/X-1a
Where it runsIn your browser; nothing is uploaded

Extending doesn't make up new image content. A mirrored photo edge repeats the same detail flipped, so a face or lettering that runs off the edge looks odd in the bleed: fix that one in the source file. A PDF whose page already includes the bleed, with no trim box, opens at that full size, and the card adds 0.125 in more; check the size in the card's subtitle. Type is set again in the fonts this computer has, and the saved PDF embeds those; a font the PDF uses but this computer lacks shows as a row on the card, and Resolve Missing Fonts... on that row swaps it. A CMYK PDF opens as RGB: Save PDF keeps RGB, and Save PDF/X-1a writes CMYK worked out with a simple formula, not the press profile.

How much bleed does my printer want?
Check the order page. Vistaprint's business card guide asks for 0.125 in on each side, and KDP asks for 0.125 in on the top, bottom and outside edge. If yours names 3 mm or 5 mm, pick it in the card once the art reaches the bleed, or type any width in File > Document Setup....
The printer still says there's no bleed.
The bleed was there but white: the art stopped at the trim. Open the PDF here again, click Extend art into the bleed, and save.
Does the text stay text?
Yes, in the fonts this computer has; nothing is turned into a picture. If the card shows a font as not on this computer, click Resolve Missing Fonts... before you save.